Hollow Section & Tube Products
We have a comprehensive range of hollow sections & tube in the following grades:
- Hot Finished Structural Hollow Sections to EN10210 S355J2H
- Cold Formed Hollow Sections to EN10219 S235JRH/S355J2H
- BS 1387 Tube
- SHS 20X20X2MM – 200X200X6.3MM
- RHS 50 X 25 X 2MM – 200 X 100 X 6MM
- CHS 26.9 X 2.5MM – 168.3 X 6MM
Scaffolding Tubes
We have a very large selection of scaffolding tubes available to purchase from us, if we do not have a piece of equipment you need, then we can either order it in or have it shipped directly from one of our suppliers straight to your door / warehouse.
- 5ft Galvanised Tubes
- 8ft Galvanised Tubes
- 10ft Galvanised Tubes
- 13ft Galvanised Tubes
- 16ft Galvanised Tubes
- 21ft Galvanised Tubes
- 20ft Aluminium Tubes
Flats & Angles
Mild steel is the most common form of steel because its price is relatively low whilst it provides material properties that are acceptable for many applications. The material has good weldability properties and is used in most general fabrication and structural steel applications. Steel grade S275JR.
- Mild Steel Equal Angles 20 X 20 X 3MM – 200 X 200 X 12MM
- Mild Steel Unequal Angles 40 X 25 X 4MM – 200X150X12MM
- Flats 13 X 3MM – 300 X 25MM
Beams & Columns
Mild steel is the most common form of steel because its price is relatively low whilst it provides material properties that are acceptable for many applications. The material has good weldability properties and is used in most general fabrication and structural steel applications.
Universal beams & columns are widely used in the construction industry and are available in a variety of standard sizes and lengths. They may be used both on their own, or acting compositely with another material, typically concrete.
These steel sections are commonly specified with a code consisting of the major dimension (usually the depth)-x-the minor dimension-x-the mass per metre-ending with the section type, all measurements being metric. Therefore, a 152 x 152 x 23 UC would be a column section (UC = universal column) of approximately 152mm depth x 152mm width and weighing 23kg/m of length.
- Universal Beams 127 X 76 X 13MM – 533 X 210 X 122
- Universal Columns 152 X 152 X 23MM – 305 X 305 X 97MM
